Hydraulic Steering Pipe Lines, Hynautic.Inc

[will-stacey]

Can anyone help to locate a supplier either in France, where I am now, or elsewhere for the black hydraulic pipe for a Snowgoose elite,
Bill Stacey willgstacey@hotmail.com

_________________
time is of the moment

[ChrisH]

Hi Bill,
Cannot this part be made up by your local hydraulic hose and fittings company? Hydraulic hose is hydraulic hose, providing the pressure rating is correct, and they should be able to match-up/bodge somehow (with a local engineering company maybe) the fitting if it is an odd ball size.

Regards, Chris

[will-stacey]

thats what I thought but the frenchman took a sharp intake of breath through his teeth !!!!!!!!!!!!

_________________
time is of the moment

[ChrisH]

I had some hydraulic pipe and fittings made up by a company in West Sussex - I am going to fit a Navman auto-helm to my Quest 31. They were very helpful and very reasonably priced, made up my bits there and then, and they have made up auto-helm hydraulic systems complete for others in the past. They may be able to help.

Their details are:
Industrial Engineering Supplies Ltd, Unit G16, Rudford Industrial Estate, Ford, Arundel, West Sussex, BN16 0BD, England, tel: 0044 (0)1903 734000, fax: 0044 (0)1903 734123, e-mail: sales@iesltd.net

You could contact them, send a sketch by fax with dimensions and details of the fittings, and see what they say. They may be able to make up what you require and shipping it out to you could not cost much probably. Maybe one way out - worth a try.

Or try Vetus, e-mail: benelux@vetus.nl in Holland, or in the UK e-mail: sales@vetus.co.uk, tel: 0044 (0)2380 454507 (Southampton). They do lots of hydraulic boaty bits.

Good Luck, Chris